Designing Coconut Biscuit Packaging Using the Kansei Engineering Method
Keywords:
coconut biscuits, kansei engineering, packaging, PCA, planningAbstract
Coconut biscuits are one of the snacks favoured by the Indonesian people. The current coconut biscuits packaging has several shortcomings, namely that the opened biscuits cannot be resealed because they do not have a cover, so bacteria easily contaminate the contents of the product, require additional containers to store the product so that it is difficult to store, the packaging material only uses plastic which causes the product to be easily destroyed, and the product is quickly scattered when the packaging is opened. Therefore, this study aims to determine the design concept for coconut biscuit packaging that aligns with consumer priorities. The coconut biscuit packaging design concept was planned using the Kansei Engineering method with the Principal Component Analysis (PCA) supporting method. The Kansei words obtained were 47 words. The results of the packaging concept obtained were one Principal Component (PC) with the most significant standard deviation on PC 1 with a value of 7.5565, so it can be concluded that the optimal packaging concept is ergonomic and complex.
References
Anasrulloh, M., & Basiron. (2022). Pelatihan Pembuatan Kemasan Packaging Untuk Meningkatkan Pemasaran Produk Olahan Kacang Emping Melinjo. Jurnal Pengabdian Kepada Masyarakat, 5, 26–30. https://doi.org/10.29100/j-adimas.v5i1.631
Anwar, S. (2024). Perancangan Antarmuka Pada Aplikasi SIMAKU Dengan Kansei Engineering Dan AHP (Studi Kasus: Universitas Muhammadiyah Cirebon). Jurnal Penelitian Aksi Literasi, 8(4), 886–899. https://doi.org/10.46799/arl.v8i4.312
Arini, R. W., Wahyuni, R. S., Munikhah, I. A. T., Ramadhani, A. Y., & Pratama, A. Y. (2023). Perancangan Desain Kemasan Makanan Khas Daerah Keripik Tike Menggunakan Pendekatan Metode Kansei Engineering dan Model Kano. Jurnal Intech Teknik Industri Universitas Serang Raya, 9(1), 42–52. https://doi.org/10.30656/intech.v9i1.5541
Bhayukusuma, T. S., & Hadiana, A. (2021). Ekstraksi TF-IDF untuk Kansei Word dalam Perancangan Interface E-Kinerja. Journal of Information Technology, 3(1), 5–16. https://doi.org/10.47292/joint.v3i1.44
Coghlan. (2014). A Little Book of R Mulivariete Analysis: Release 01. Cambridge (UK): Trust Sanger University.
Delfitriani, D., Diki, & Uzwatania, F. (2022). Pengembangan Konsep Desain Kemasan Produk Handsanitizer Dengan Pendekatan Kansei Engineering Development. Jurnal Agroindustri Halal, 8, 13–20. https://doi.org/https://doi.org/10.30997/jah.v8i1.4916
Delfitriani, D., Uzwatania, F., Maulana, I., & Ariyanto, D. (2023). Pengembangan Konsep Desain Kemasan Produk Lealoe dengan Pendekatan Kansei Engineering. Jurnal Agroindustri Halal, 9(2), 229–237. https://doi.org/https://doi.org/10.30997/jah.v9i2.7465
Fadly, M. F., & Satori, M. S. (2021). Usulan Perancangan Kemasan Kopi Palasari Kelompok Tani Giri Senang dengan Menggunakan Kansei Engineering. Bandung Conference Series: Industrial Engineering Science, 1(1), 1–8. https://doi.org/10.29313/bcsies.v1i1.4
Fathimahhayati, L. D., Halim, C. I., & Widada, D. (2019). Perancangan Kemasan Kerupuk Ikan Dengan Menggunakan Metode Kansei Engineering. Jurnal Rekavasi, 7(2), 47–58. https://ejournal.akprind.ac.id/index.php/rekavasi/article/view/2224/1714
Firdaus, M. F., & Sari, N. P. (2024). Penerapan Konsep Desain Kemasan Sale Pisang Menggunakan Metode TF-IDF dan K-Means Cluster Berbasis Kansei Engineering. Seminar Nasional Inovasi Vokasi, 3(1), 291–299. https://prosiding.pnj.ac.id/sniv/article/view/2311/1438
Fitriani, R., & Nugraha, A. T. (2024). Analisis Pengaruh Material Kemasan, Tampilan Kemasan, Bentuk Kemasan, Dan Informasi Pada Kemasan Terhadap Minat Beli Makanan Khas Lampung Keripik Pisang. Jurnal Ilmiah Teknik Industri, 12(1), 33–40. https://doi.org/10.24912/jitiuntar.v12i1.29047
Isa, I. G. T., & Hadiana, A. H. (2017). Implementasi Kansei Engineering dalam Perancangan Desain Interface E-Learning Berbasis web (Studi Kasus: SMK Negeri 1 Sukabumi). Jurnal Teknik Informatika Dan Sistem Informasi, 3(1), 104–115. https://ejournal.akprind.ac.id/index.php/rekavasi/article/view/2224/1714
Isna, A., Sari, N. P., Maharani, D., & Fadhillah, F. (2024). Implementasi Kansei Engineering dalam Menentukan Konsep Pengembangan Kemasan Rujak Buah Potong. Jurnal Intech Teknik Industri Universitas Serang Raya, 10(1), 9–18. https://doi.org/10.30656/intech.v10i1.7832
Istiyanto, B., & Nugroho, L. (2017). Analisis Pengaruh Brand Image, Harga, Dan Kualitas Produk Terhadap Keputusan Pembelian Mobil (Studi Kasus Mobil LCGC di Surakarta). Eksis: Jurnal Riset Ekonomi Dan Bisnis, 12(1), 1–8. https://doi.org/10.26533/eksis.v12i1.75
Kodžoman, D., Hladnik, A., Čuden, A. P., & Čok, V. (2023). Assessment and Semantic Categorization of Fabric Visual Texture Preferences. Autex Research Journal, 23(2), 279–291. https://doi.org/10.2478/aut-2022-0006
Lamalouk, E. I., & Simanjuntak, R. A. (2023). Re-Design Kemasan Produk Keripik Tempe Dengan Menggunakan Metode Kansei Engineering. Jurnal Rekayasa Industri (JRI), 5(1), 35–42. https://doi.org/10.37631/jri.v5i1.838
Maflahah, I., Lestari, H., & Asfan, D. F. (2023). Kansei Engineering Untuk Desain Kemasan.
Mas’ad, Yasin, H., & Maruddani, D. A. I. (2016). Analisis Faktor-Faktor yang Mempengaruhi Persentase Penduduk Miskin di Jawa Tengah Dungan Metode Geographically Weighted Principal Components Analysis (GWPCA) Adaptive Bandwith. Jurnal Gaussian, 5(3), 487–496. https://doi.org/10.14710/j.gauss.5.3.487-496
Mashadi, M., & Munawar, A. (2021). Pendampingan Pengembangan Kemasan Produk Bagi UMKM Kota Bogor. Jurnal Abdimas Dedikasi Kesatuan, 2(1), 115–120. https://doi.org/10.37641/jadkes.v2i1.1402
Mufreni, A. N. (2016). Pengaruh Desain Produk, Bentuk Kemasan Dan Bahan Kemasan Terhadap Minat Beli Konsumen (Studi Kasus Teh Hijau Serbuk Tocha). Jurnal Ekonomi Manajemen, 2(2), 48–54. https://doi.org/10.35794/emba.v11i1.45579
Nasution, M. Z. (2020). Face Recognition based Feature Extraction using Principal Component Analysis (PCA). Journal of Informatics and Telecommunication Engineering, 3(2), 182–191. https://doi.org/10.31289/jite.v3i2.3132
Nugroho, S., Pujotom, W, D., Ulkhaq, M. M., & Permadi, D. T. (2017). Redesain Kemasan Makanan Ringan Olahan pada UMKM Center Jawa Tengah dengan Metode Kansei Engineering. Performa : Media Ilmiah Teknik Industri, 16(1), 77–86. https://doi.org/10.20961/performa.16.1.12758
Pusat Data dan Sistem Informasi Pertanian. (2015). Retrieved October 4, 2024, from http://epublikasi.setjen.pertanian.go.id/epublikasi/StatistikPertanian/2015/STATISTIK%20KONSUMSI%20PANGAN%202015/files/assets/basic-html/page126.html
Putri, K. A. A., Segita, N. E., Nuraini Nuryadin, R., Lutfiah Nur, Y., & Purnama Sari, N. (2024). Perencanaan Konsep Desain Kemasan Kerak Telor Menggunakan Metode Kansei Engineering. Industri Inovatif : Jurnal Teknik Industri, 14(1), 12–21. https://doi.org/10.36040/industri.v14i1.8033
Sari, N. P., Hafidah, E., Rizwan, R., & Andriyani, S. Z. P. (2023). Perancangan Desain Kemasan Bakso Goreng (Basreng) dengan Metode Kansei Engineering. Performa: Media Ilmiah Teknik Industri, 22(2), 109. https://doi.org/10.20961/performa.22.2.80674
Sari, N. P., Imam, S., Camila Zain, N., Nur Asrianti, A., Khairul Akmal, N., Salmahanifah, S., & Yusr Aminah, Z. (2023). Perancangan Desain Kemasan Penyedap Rasa Berbasis Kansei Engineering. Seminar Nasional Inovasi Vokasi, 2(1), 1–11. https://prosiding.pnj.ac.id/sniv/article/view/326
Sari, N. P., Immanuel, J., & Cahyani, A. (2020). Aplikasi Kansei Engineering Dan Fuzzy Analytical Hierarchical Process Dalam Pengembangan Desain Kemasan. Journal Printing and Packaging Technology, 1, 9–21. https://doi.org/10.32722/printpack.v1i1.2469
Thesman, O. G., & Rahardjo, J. (2017). Pengembangan Produk Masker di PT. XYZ Dengan Metode Kansei Engineering. Jurnal Titra, 5(1), 31–38. https://publication.petra.ac.id/index.php/teknik-industri/article/view/5235
Vilano, N., & Budi, S. (2020). Penerapan Kansei Engineering dalam Perbandingan Desain Aplikasi Mobile Marketplace di Indonesia. Jurnal Teknik Informatika Dan Sistem Informasi, 6(2), 354–364. https://doi.org/10.28932/jutisi.v6i2.2705
Yasin, M. A., Hakim, A., & Perdana, M. F. (2024). Penerapan Kansei Engineering Dalam Desain Ulang Kemasan Kue Tambang di UMKM Sumber Jaya. G-Tech: Jurnal Teknologi Terapan, 8(3), 1705–1719. https://doi.org/10.33379/gtech.v8i3.4550
Zulkarnain, Z. (2020). Strategi Konsep Desain Kemasan Kopi Specialty Untuk Industri Skala Mikro. Jurnal Desain, 8(1), 17–26. https://doi.org/10.30998/jd.v8i1.6491
Downloads
Submitted
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Agroindustrial Technology Journal
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The author whose published manuscript approved the following provisions:
1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).
2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.
