Designing Value Creation for an Agro-Based Batik Product: A Design Thinking Approach for Batik Kota at Rumah Batik Palbatu
DOI:
https://doi.org/10.21111/atj.v10i2.156Keywords:
batik kota, design thinking, perceived value, PERVAL, value creationAbstract
Batik Kota is a line of contemporary batik products developed by Rumah Batik Palbatu, a creative SME in Jakarta, since mid-2025. These products highlight Jakarta’s urban culture and target young professionals. Despite their distinctive designs, Batik Kota products have not yet become consumers’ top choice. This situation indicates a gap between the value offered and the perceived value experienced by consumers. This study aims to identify the state of value creation at Batik Kota, understand consumer needs and expectations, design a conceptual value creation model, and conduct an initial validation of the designed model. The study employed a mixed-methods sequential exploratory approach within the Design Thinking framework, consisting of the Empathize, Define, Ideate, Prototype, and Test stages. Qualitative data were collected through semi-structured interviews with extreme users, mainstream users, non-buyer-aware users, and internal stakeholders, and were subsequently analyzed using thematic analysis. The resulting model was realized in the form of a men’s shirt mockup and a product catalog, then validated through the Perceived Value Scale (PERVAL) measurement on 30 respondents for MVP 3 and qualitative assessment by two domain experts for MVP 2. The research results identified four pillars of value creation: Identity & Heritage, Storytelling & Culture, Lifestyle & Styling, and Social Proof & Experience. The PERVAL measurement results showed a Grand Mean perceived value of 4.37, falling into the “very high” category. The Quality/Performance Value dimension received the highest score of 4.51, while Price/Value for Money received the lowest score of 4.06, which still falls within the “high” category. All PERVAL dimensions had a Cronbach’s Alpha value > 0.70. These results indicate that the designed model has the potential to strengthen consumers’ perceived value, although the alignment of price with the benefits received still needs to be addressed in future development.
References
Aliyyuldafa, N. C., & Anjaningrum, W. D. (2025). The Overriding of Product Innovation , Aesthetic Value , and Social Media Marketing to Increase Consumer Purchase Intention of ‘ Malangan ’ Batik. https://doi.org/10.32812/jibeka.v19i1.2013
Anggorojati, A., Romadhon, A. G., Handayani, E. F., Jahroo, W. L., & Mukti, P. U. (2025). Eksplorasi Nilai Estetika Batik Kontemporer sebagai Identitas Budaya Lokal dalam Industri Kreatif Global. RIGGS: Journal of Artificial Intelligence and Digital Business, 4(3), 6909–6922. https://doi.org/10.31004/riggs.v4i3.3036
Asfan, D. F., & Maflahah, I. (2021). Analisis Strategi Pengembangan Usaha Garam Fortifikasi Kelor di Kabupaten Sampang. Agroindustrial Technology Journal, 5(1), 34–43. https://doi.org/http://dx.doi.org/10.21111/atj.v5i1.5147
Austin, J. E. (1992). Agroindustrial Project Analysis Critical Design Factors (2nd ed.). The Johns Hopkins University Press.
Azmy, A., Wiadi, I., & Risza, H. (2023). Product Value Creation Training Through Value Proposition Canvas (VPC) with the South Jakarta Small Medium Enterprise (SME) Community. Jurnal Pengabdian Pada Masyarakat, 8(4), 834–845. https://doi.org/10.30653/jppm.v8i4.440
Boone, H. N., & Boone, D. A. (2012). Analyzing Likert data. Journal of Extension, 50(2). https://doi.org/10.34068/joe.50.02.48
Braun, V., & Clarke, V. (2006). Using Thematic Analysis in Psychology. Qualitative Research in Psychology, 3(2), 77–101. https://doi.org/10.1191/1478088706qp063oa
Braun, V., & Clarke, V. (2019). To saturate or not to saturate? Questioning data saturation as a useful concept for thematic analysis and sample-size rationales. Qualitative Research in Sport, Exercise and Health, 13, 201–216. https://doi.org/10.1080/2159676X.2019.1704846
Carter, N., Bryant-Lukosius, D., Dicenso, A., Blythe, J., & Neville, A. J. (2014). The use of triangulation in qualitative research. Oncology Nursing Forum, 41(5), 545–547. https://doi.org/10.1188/14.ONF.545-547
Creswell, J. W., & Plano Clark, V. L. (2018). Designing and Conducting Mixed Methods Research (3rd ed.). SAGE Publications.
Henriksen, D., Richardson, C., & Mehta, R. (2017). Design Thinking: A Creative Approach to Educational Problems of Practice. Thinking Skills and Creativity, 26, 140–153. https://doi.org/10.1016/j.tsc.2017.10.001
Joungtrakul, J., Chitwattanakorn, T., Chaiyasoonthorn, W., & Luekitinan, W. (2025). Research ethics: Protecting privacy of participants in qualitative research. Journal of Health Science and Alternative Medicine, 7(1), 91–105. https://so03.tci-thaijo.org/index.php/hsa/article/view/277926
Kelley, D., & Brown, T. (2018). An introduction to Design Thinking. Institute of Design at Stanford, 6. https://dschool-old.stanford.edu/sandbox/groups/designresources/wiki/36873/attachments/74b3d/ModeGuideBOOTCAMP2010L.pdf
Kementerian Perindustrian Republik Indonesia. (2025). Menperin: Nilai ekspor batik 7,63 juta dolar AS pada triwulan I 2025. ANTARA News. https://www.antaranews.com/berita/5001913/menperin-nilai-ekspor-batik-763-juta-dolar-as-pada-triwulan-i-2025
Kurek, J., Brandli, L. L., Leite Frandoloso, M. A., Lange Salvia, A., & Mazutti, J. (2023). Sustainable Business Models Innovation and Design Thinking: A Bibliometric Analysis and Systematic Review of Literature. Sustainability (Switzerland) , 15(2). https://doi.org/10.3390/su15020988
Kusumawardani, S. D. A., Kurnani, T. B. A., Astari, A. J., & Sunardi, S. (2024). Heliyon Readiness in implementing green industry standard for SMEs : Case of Indonesia ’ s batik industry. Heliyon, 10(16), e36045. https://doi.org/10.1016/j.heliyon.2024.e36045
Kuswardhani, N., Agustian, R., Plus, M. L., Studi, P., Industri, T., Pertanian, F. T., & Jember, U. (2020). BUSSINES MODEL CANVAS (BMC) dan QSPM (QUANTITATIVE STRATEGIC PLANNING MATRIX): Business Development Strategy “ COFRESH ” Product Using Business Model Canvas ( BMC ) and SWOT Analysis. 04(02), 167–181.
Li, Y., & Li, J. (2022). The Influence of Design Aesthetics on Consumers ’ Purchase Intention Toward Cultural and Creative Products : Evidence From the Palace Museum in China. 13(July), 1–9. https://doi.org/10.3389/fpsyg.2022.939403
Liedtka, J. (2020). Putting Technology in Its Place: Design Thinking’s Social Technology at Work. California Management Review, 62, 53–83. https://doi.org/10.1177/0008125619897391
Liu, L., & Hongxia, Z. (2024). Research on consumers’ purchase intention of cultural and creative products-Metaphor design based on traditional cultural symbols. PLoS ONE, 19(5 May), 1–24. https://doi.org/10.1371/journal.pone.0301678
Nurfadila, A. R., Negara, P. P. S., & Utomo, I. P. (2023). Analisis Penerapan Job Description Karyawan sebagai Penunjang Perkembangan UMKM Pisang Segading Ponorogo. Agroindustrial Technology Journal, 7(3), 38–45. https://doi.org/http://dx.doi.org/10.21111/atj.v7i3.10208
Nuriana, W., & Winarni, M. (2020). Utilization of crude from part of kepok banana trees with maseration extraction as textile colors. Agroindustrial Technology Journal, 04(02), 130–135. https://doi.org/http://dx.doi.org/10.21111/atj.v4i2.4983
Polit, D. F., & Beck, C. T. (2006). The content validity index: Are you sure you know what’s being reported? critique and recommendations. Research in Nursing & Health, 29(5), 489–497. https://doi.org/https://doi.org/10.1002/nur.20147
Porter, M. E. (1985). Competitive Advantage: Creating and Sustaining Superior Performance. Free Press. https://books.google.com/books?id=H9ReAijCK8cC
Prabhawati, Y. N. E. A. T. A. (2022). Pengakuan UNESCO Atas Batik Sebagai Warisan Budaya Tak Benda (WBTB). Majalah Ilmiah DIAN ILMU, (Vol 21, No 2 (2022): MAJALAH ILMIAH “DIAN ILMU” APRIL 2022), 113–128. http://jurnal.stiapembangunanjember.ac.id/index.php/dianilmu/article/view/260/pdf
Prahalad, C. K., & Ramaswamy, V. (2004). Co‐creating unique value with customers. Strategy & Leadership, 32(3), 4–9. https://doi.org/10.1108/10878570410699249
Rahayu, A., Krishna Yuliawati, A., & Fakhrudin, S. (2020). Value Creations Through Co-Creation and Collaboration Strategy in SMEs Creative Industry. Jurnal Pendidikan Ekonomi Dan Bisnis (JPEB), 8(1), 77–85. https://doi.org/10.21009/jpeb.008.1.8
Sari, S. R., Arifan, F., Triyono, T., & Niswah, U. (2020). Value Chain Analysis on Handmade Batik Products. Jejak, 13(1), 230–241. https://doi.org/10.15294/jejak.v13i1.21771
Saunders, M., Lewis, P., & Thornhill, A. (2023). Research Methods for Business Students.
Sekaran, U., & Bougie, R. (2016). Research Methods For Business: A Skill Building Approach, 7th Edition (7 th). John Wiley & Sons, Ltd.
Sindu Kusuma Dewi, R. R., & Muhajirin, . (2024). The Symbolic Meaning of Batik Manding as a Local Cultural Identity of Gunung Kidul using Charles Sanders Pierce’s Semiotic Approach. International Journal of Multicultural and Multireligious Understanding, 11(2), 571. https://doi.org/10.18415/ijmmu.v11i2.5408
Soekartawi. (2000). Pengantar agroindustri. Raja Grafindo Persada.
Sweeney, J. C., & Soutar, G. N. (2001). Consumer perceived value: The development of a multiple item scale. Journal of Retailing, 77(2), 203–220. https://doi.org/10.1016/S0022-4359(01)00041-0
Xu, A., Baysari, M. T., Stocker, S. L., Leow, L. J., Day, R. O., & Carland, J. E. (2020). Researchers’ views on, and experiences with, the requirement to obtain informed consent in research involving human participants: A qualitative study. BMC Medical Ethics, 21(1), 1–12. https://doi.org/10.1186/s12910-020-00538-7
Yusof, M. Y. P. M., Teo, C. H., & Ng, C. J. (2022). Electronic informed consent criteria for research ethics review: a scoping review. BMC Medical Ethics, 23(1), 1–11. https://doi.org/10.1186/s12910-022-00849-x
Yusoff, M. S. B. (2019). ABC of Content Validation and Content Validity Index Calculation. Education in Medicine Journal, 11(2), 49–54. https://doi.org/10.21315/eimj2019.11.2.6
Downloads
Submitted
Accepted
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Agroindustrial Technology Journal

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The author whose published manuscript approved the following provisions:
1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).
2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.






