Risk Assessment And HACCP-Based Hazard Control in Malt Candyprocessing
Keywords:
CCP, HACCP, malt candy, metal contamination, risk assessmentAbstract
Malt candy is a type of hard confectionery product formulated with the addition of specific leavening agents that, during the heating (oven) process, produce a light, porous, and melt-in-the-mouth texture. The safety and quality of malt candy are strongly affected bythe hygienic conditions of the production environment, process parameters, and raw material handling. Therefore, the of the HACCP system plays an essential rolein identifying and controlling potential hazards at every stage of the manufacturing process.This study aims to perform a comprehensive risk assessment and apply HACCP-based hazard control measures in the malt candy production line. The research involves developing a detailed process flow diagram, identifying potential biological, chemical, and physical hazards,determining(CCPs)establishing critical limits, and formulating monitoring and corrective action procedures. Data were collected through on-site observation, environmental inspection, and evaluation of production records to assess risk levels and compliance with HACCP principles.The findings indicate that the primary Critical Control Point (CCP) is located at the inspection stage, where a metal detector is employed to ensure that the product is free from metallic contaminants and compliant with food safety requirements. Furthermore, the results suggest that metal contamination control should not only be addressed at the CCP level, but also reinforced as a Control Point within the prerequisite program (CPP), thereby enabling corrective actions to be properly traced and theireffectiveness continuously evaluated. Accordingly, it is recommended that the company strengthen documentation, verification activities, and equipment maintenance at this stage as part of ongoing improvements in the implementation of the prerequisite (basic feasibility) program. This approach ensures that the application of HACCP is not merely reactive, but also preventive, measurable, and fully accountable through a clear audit trail, serving as a reference model for similar confectionery industries.
Keywords : CCP, HACCP, Malt Candy, Metal Contamination, Risk Assessment
References
A, Mega. S.J.N dan Nalawati, A.N. (2024). Study of The Application of Hazard Analysis and Critical Control Point (HACCP) in Chocolate Bar Processing (Case Study at PTPN XII Kendeng ßlembu Banyuwangi). Journal of Food Industrial Technology Vol. 1, No. 2, Mei 2024, 73-86 DOI: https://doi.org/10.25047/jofit.v1i2.4921 E-ISSN. 3032-4963
Asriani, Yuniarti. T, Indratama, A. (2023). Quality, Basic Feasibility, and Implementation of Hazard Analysis Critical Control Point (HACCP) in Frozen Cooked Shrimp Processing at PT. XYZ. Buletin Jalanidhitah Sarva Jivitam, 5 (2), 2023, 149-165. DOI: http://dx.doi.org/10.15578/bjsj.v5i2.13142
Awangsih, W,. & Juwitaningtyas, T,. (2023). Determination of Critical Control Points in the Chocolate Bar Production Process at PT Aneka Coklat Kakoa Bandar Lampung. Jurnal Ilmiah Teknosains, Vol 9(1). p-ISSN 2460-9986. DOI: https://doi.org/10.26877/jitek.v9i1/Mei.12752
Azhary, Zainur.R., Sumiyanto, S., Mulyani, H., & Sipahutar, Y.H. (2022). Establishment of Critical Control Points (CCP) in the Processing of Cobia Fish (Rachycentron canadum) Panko Bites and Export Requirements to the United States. Prosiding. Seminar Nasional Perikanan Indonesia Ke-23. Politeknil AUP, Jakarta, 23-24 Agustus 2022. DOI: http://dx.doi.org/10.15578/psnp.12100
Bhernama, B.G,. (2017). Study of Hazard Analysis Critical Control Point (HACCP) on Unlabeled Soft Drink Products Sold by Street Traders in Banda Acah. Jurnal of Islamic Science and Technology Vol 3(2). DOI: https://doi.org/10.22373/ekw.v3i2.2097
[CAC] Codex Alimentarius Commission. The Science of food standards. [Accessed on June 2, 2025]. Available from: https://openknowledge.fao.org/items/2bb27778-26f7-4db8-9bf7-a6f1ed5ab752
Fakhmi, A., Rahman, A., & Riawati, L. (2013). Design of a Food Safety System (Hazard Analysis and Critical Control Points — HACCP) for the Sugar Production Process at PG Kebon Agung, Malang.Jurnal Rekayasa dan Manajemen Sistem Industri Vol 2(6). Teknik Industri Uniiversitas Brawijaya.
Febriana, Ike,. Dan Prayogo. (2006). Determination of The CCP (Critical Control Point) on The Production Whole Round Tiger Grouper (Ephinephelus fuscoguttatus) in PT. Alam Jaya Surabaya, East Java. Journal of Marine and Coastal Science Vol 8(2):73. DOI:10.20473/jmcs.v8i2.21151
Hasanah, N.L, et al. (2022). Food Safety and Food Security. Publisher: PT Global Eksekutif Teknologi, ISBN: 978-623-8102-57-0.
Hasniani. Ridwan, M,.& Waliono, A.R. (2024). Determination of Critical Control Points (CCP) in the Canning Process of Lemuru Fish (Sardinella sp.) at PT Sarana Tani Pratama, Bali. Botani: Publikasi Ilmu Tanaman dan Agribisnis, Vol 1(3), 123-135. DOI: https://doi.org/10.62951/botani.v1i3.108
Hendy, Saputra. M., Khoiriyah. N., & Fatmawati, W. (2022). Quality Control Using the HACCP Method on ‘Zahra’ Madu Mongso Products (A Case Study at the Rohmah Food Home Industry in Kudus). Jurnal Aplikasi Ilmu Teknik Industri (JAPTI), 2(2), 112–124. DOI: https://doi.org/10.32585/japti.v2i2.2168
Hermawan. D., Ginantaka. A., & Syarbaini. A. (2022). Risk analysis of production machinery maintenance at pt. xyz uses fuzzy failure mode and effect analysis method: case study in amdk industry. Agroindustrial Technology Journal 08(2) 94-111. DOI: http://doi.org/10.21111/atj.v8i2.12116
Koswara, Sutrisno. (2009). HACCP dan Penerapannya Pada Produk Bakery. [Accessed on June 5, 2025]. Available from: https://tekpan.unimus.ac.id/wp-content/uploads/2013/07/HACCP-DAN-PENERAPANNYA-DALAM-INDUSTRI-BAKERY.pdf
Koswara, Sutrisno. (2023). HACCP (Hazard Analysis and Critical Control Point) Plan Model for the Chili Sauce Industry. [Accessed on September 25, 2025]. Available from: https://repository.ipb.ac.id/jspui/bitstream/123456789/122258/1/MODEL%20GENERIK%20RENCANA%20HACCP%20INDUSTRI%20%20SAUS%20CABE.pdf
Kurniawan, Wawan. (2016). Determination of Critical Control Points (CCP) and Monitoring within the Hazard Analysis and Critical Control Point (HACCP) Management System (Case Study: PT X Food Industry). Prosiding. Seminar Nasional Sains dan Teknologi Semnastek FTUMJ. [Accessed on October 25, 2025]. Available from: https://jurnal.umj.ac.id/index.php/semnastek/issue/view/94 p-ISSN: 2407-1848. E-ISSN: 2460-8416.
Mafaza, Anim., dan Kumalasari, I.D. (2022). Analysis of the Implementation of Hazard Analysis and Critical Control Points (HACCP) in the Oriflakes Production Process at PT. Serelia Prima Nutrisia, Yogyakarta. Agroindustrial Technology Journal 06(2) 175-187. DOI: http://dx.doi.org/10.21111/atj.v6i2.8471
Mahbubah, Febriyanti Shobaqiyatul. (2022). Implementation of Hazard Analysis and Critical Control Points (HACCP) in the Freezing Process of Vannamei Shrimp (Litopenaeus vannamei) in PND (Peel and Deveined) Form at PT Istana Cipta Sembada, Banyuwangi, East Java. Politeknik Kelautan dan Perikanan Sidoarjo. [Accessed on September 5, 2025]. Available from: https://repository.poltekkpsidoarjo.ac.id/id/eprint/299/
Morkis, Graźyna. (2010). The Level of Implementing GHP, GMP, and HACCP Systems into the Food Industry. Food Science Technology Quality. DOI:
https://doi.org/10.15193/zntj/2010/73/255-270
Murti, Widyana. (2022). Critical Control Point Control in Chocolate Chip Products at PT XYZ. [Accessed on 11 September 2025]. Available from: http://repository.iti.ac.id/xmlui/handle/123456789/1201
Pawestri, Setyaning. (2022). Malt as a Flavor and Nutritional Enhancer. [Accessed on June 2, 2025]. Available from: https://linisehat.com/malt-bahan-ajaib-penambah-cita-rasa-dan-zat-gizi/
Pawestri. S, Perdhana. Et al. (2024). Physicochemical and Sensory Characteristics of Hard Candy Made of Palm Sugar and Trigona Honey. Jurnal Kolaboratif Sains, Vol (7) 9. DOI: https://doi.org/10.56338/jks.v7i9.5783
Prayitno, Sutrisno. A,.& Tjiptaningdyah, R. (2018). Implementation of the 12 Steps of Hazard Analysis and Critical Control Points (HACCP) as a Food Safety System for Fishery-Based Products. Jurnal Agrica Vol. 11(2). DOI: 10.31289/agrica.v11i2.1808.g1681
Rahayu, B.S., Maflahah, I., & Asfan. (2020). Quality Control Analysis in the Freezing Process of Vannamei Shrimp (Litopenaeus vannamei) Using Six Sigma. Agroindustrial Technology Journal 04(2) 108-119. DOl: http://dx.doi.org/10.21111/atj.v4i2.4932
Regulation of the Government of the Republic of Indonesia Number 89 of 2019. Food Safety. [Accessed on 5 June 2025]. Available from: https://standarpangan.pom.go.id/dokumen/peraturan/202x/2019-PP_86_th_2019_english_version.pdf
Rochman, S.N., Nurmaydha, A.,& Pratama, G.R. (2020). Implementation of the Hazard Analysis and Critical Control Point (HACCP) System in the Bakery Industry. Agroindustrial Technology Journal 04(1) 53-64. DOl: http://dx.doi.org/10.21111/atj.v4i1.4293
Sa’diyah, K., Ramadhani, L., & Harya, G. I. (2024). Hazard Analysis and Critical Control Points (HACCP) in the Product Design of Orange Fruit Juice Beverages at PT Zestful Drink Innovation. Jurnal Pengabdian Kepada Masyarakat, 1(1), Hal 1–19. DOI: https://doi.org/10.3342/jkepmas.v1i1.233
Sari, L., Nugroho, S. D., & Yuliati, N. (2022). Implementation of Hazard Analysis and Critical Control Points (HACCP) in the Production Process of Cooked Peeled Tail-On Shrimp at PT X. Technomedia Journal, 7(3). DOI: https://doi.org/10.33050/tmj.v7i3.1916
Siregar, Nurtama. G.P,. & Budi. (2017). Metal Detector Validation Process for Critical Control Point Control at PT XYZ. [Accessed on 10 September 2025]. Available from: https://repository.ipb.ac.id/handle/123456789/87246
Siti.N, Susanti. (2016). Control of Pathogenic Microorganisms (Foodreview Indonesia Vol. XII, No. 12, 2016, ‘Trendy Bakery’ edition, or pustakapangan.com). [Accessed on 10 September 2025]. Available from: https://www.foodreview.co.id/blog-5669064-pengendalian-mikroba-patogen-pada-produk-pangan.html
[SNI] Indonesian National Standard Number 3547.1:2008. Confectionery – Part 1: Hard Candy. [Accessed on 02 June 2025]. Available from: https://pesta.bsn.go.id/produk/detail/7435-sni354712008
Yuwana, N.P, dan Wahyuni, H.C. (2024). Assessing Food Safety Risks in Wafer Production. Prosiding. Procedia of Engineering and Life Science Vol. 7 2024. Universitas Muhammadiyah SIdoarjo.
Downloads
Submitted
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Agroindustrial Technology Journal
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The author whose published manuscript approved the following provisions:
1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).
2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.
