ANALISIS DAN DESAIN SISTEM PRODUKSI SERAT PUTIH MENGGUNAKAN LIMBAH PADAT SABUT KELAPA SAWIT (PALM PRESS FIBRE)
Analysis and Design of White Fiber Production System Using Palm Oil Solid Waste (Palm Press Fiber)
Keywords:
production system, white fiber, BPMN, linear programming, wasteAbstract
An effort to assist management in planning and making decisions regarding the optimal allocation require design and system analysis and formulation. Based on these conditions, it is necessary to analyze and plan a white fiber production system using solid waste of palm press fibre. The purpose of this paper is to create a design and system for producing white fiber using solid waste of palm oil (palm press fiber) and optimizing the productivity of white fiber by minimizing costs. The method used in making designs and systems is by developing systems, namely system analysis, system design, system implementation using the sybase power designer software and the optimal solution determination technique used is the simplex method processed using WinQSB software. The results of the system design are implemented successfully and the results of the model logic verification are correct. In the formulation of cost minimization has been obtained minimizing production costs by immersing 90 minutes for optimal productivity. Therefore, the results of the analysis that has been carried out to maximize the income of the production company, the production process is carried out for 630 minutes at a production cost of IDR 59,610,000 with a production capacity of 1000 kg.
References
Djatna T. 2019. Analisis dan Desain Sistem Produksi Agroindustri dengan Pendekatan Digital Business Ecosystem. Bogor: Sekolah Pascasarjana IPB.
Djatna T. 2016. Analisis dan Desain Sistem Produksi Agroindustri. Bogor: Institut Pertanian Bogor
DPR. 2013. Analisis Dampak Pelaksanaan Program Low Cost Green Car Terhadap Pendapatan Negara. [internet]. [Waktu dan tempat pertemuan tidak diketahui]. (ID). [diacu 2021 Mei 1]. Tersedia pada: https://www.dpr.go.id/doksetjen/dokumen/apbn_Analisis_dampak_pelaksanaan_LCGC_thd_penerimaan_negara20140602100433.pdf
GAIKINDO. 2013. Data Statistik Permintaan Kendaraan. [internet]. [Waktu dan tempat pertemuan tidak diketahui]. (ID). [diacu 2016 Mei 10]. Tersedia pada: http://gaikindo.or.id/index.php?option=com_content&task=blogcategory&id=0&Itemid=110.
Ginting R. 2007. Sistem Produksi. Edisi Pertama. Yogyakarta: Graha Ilmu
Hartini S, Wijaya AB, Widjojo N, Susilowati M, Petriana G. 2013. Pemanfaatan Serabut Kelapa Termodifikasi sebagai Bahan Pengisi Bantal dan Matras. Salatiga: Universitas Kristen Satya Wacana.
Irawadi TT. 1991. Produksi Enzim ekstraselular (Selulase dan Xilanase) dari Neurospora sitophilapada Substrat Limbah Padat Kelapa Sawit. Disertasi. Fakultas Pascasarjana IPB, Bogor.
Keyvani SA., N. Saeki. 1997. Behavior of Fiber Concrete Composites Using Recycled Steel Shavings. The Journal of Solid Waste Technology and Management, 24 (1): 1-8.
Mulyadi. 2005. Akuntansi biaya, edisi5. Yogyakarta: UPP AMP YKPN
White SA. 2004. Introduction to BPMN. [internet]. [Waktu dan tempat pertemuan tidak diketahui]. (ID) [diacu pada 2022 Januari 4]. Tersedia pada:https://www.bptrends.com/bpt/wp-content/publicationfiles/07-04%20WP%20Intro%20to%20BPMN%20-%20White.pdf
Zimmermann T, Bordeanu N, Strub E. 2010. Properties of nano- fibrillated cellulose from different raw materials and its reinforcement potential. Carbohydrate Polymers, 79(4), 1086–1093
Downloads
Submitted
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Agroindustrial Technology Journal
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The author whose published manuscript approved the following provisions:
1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).
2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.
