The Effect of NaOH Concentration in The Pulping Process on Yield and Organoleptic of Art Paper from Citronella Distillation Waste
Keywords:
Art paper, pulping, citronella wasteAbstract
Many types of paper are on the market according to their intended use. Art paper is a type of paper with an attractive appearance, aesthetically rich in natural and unique nuances used by mostcraftsmen. Making art paper usually uses cellulose fiber that comes from trees, so it has an impact on deforestation. This research aims to use fragrant citronella waste as an alternative to trees as raw material for paper. Lemon grass and the availability of distillate waste which has a high enough cellulose content as a raw material for paper. The method in this study is the manufacture of pulp through the alkaline method. The analysis of organoleptic properties includes surface texture, appearance, color, and degree of whiteness. The treatment in making art paper is the difference in NaOH concentration of 5%, 7%, 9%, 11% and 13%. Analysis of organoleptic properties includes surface texture, appearance, colour, and degree of whiteness. The design used in this study was a completely randomised design with 3 replications. Data were analysed using ANOVA and Duncan's test at a significant level of 0.05.. The results showed that the yield of citronella distillation waste pulp ranged from 32.53 to 34.59%. The organoleptic properties of citronella waste art paper panelists' assessment of art paper products varied greatly. Brighter colors tend to be preferred over brownish colors, the rough texture and the appearance of visible fibers make art paper more attractive. The degree of whiteness of the resulting art paper ranges from 43.39 –48.95%
References
Andrikustanto, A.A, W. Prastiwinarti dan M.Y. Hardiman. 2019. Analisa Whitness dan Brightness pada Coated Paper dan Uncoated Paper terhadap Kualitas Hasil Cetak pada Teknologi Cetak Offiset. Program Studi Teknik Grafika, Jurusan Teknik Grafika dan Penerbitan, Politeknik Negeri. Jakarta. Gultom, F., H. Supriadi, S. Savetlana. 2014. Pengaruh Perlakuan alkali Terhadap Kekuatan Tarik Serta Tandan Kosong Sawit untuk Digunakan pada Komposist Serat TKKS. Jurnal FEMA. 2,2, P 1-8.KEMENPERIN. Kementerian Perindustrian. (2011). Balai Besar Pulpdan Kertas Pusat Pengkajian Industri Hijau dan Lingkungan Hidup Badan Pengkajian Kebijakan Industri dan Mutu Industri. Pedoman Pemetaan Teknologi di Industri PulpDan Kertas. Jakarta.Hidayati, S. A. S. Zuidar dan R. Widyastuti. (2018). Pemutihan Kertas Koran Bekas Dengan Menggunakan Asam Peroksida Dalam Media Asam Asetat. Agrointek Volume 12, No. 1.Kaemba, A., E. Suryanto, C.F. Mamuaja. 2017. Karakteristik Fisiko Kimia dan
Aktifitas Antioksidan Beras Analog dari Sau Baruk (Arenga microcarpha) dan Ubi Jalar Ungu (Ipomea batatasL. Poiret).Ribowo, C. A. (2010). Kertas Medium (Corrugating Papper). Bandung: Akademi Teknologi Pulpdan Kertas.Ristianingsih, Y., Angraeni, N., & Fitriani, A. (2018). Proses Pembuatan Kertas Dari Kombinasi Limbah Ampas Tebu dan Sekam Padi DenganProses Soda. Chempublish Journal volume 2 No. 2Roliadi, H dan Anggraini, D. (2010). Pembuatan dan Kualitas Karton Seni dari Campuran PulpTandan Kosong Kelapa Sawit, Sludge Industri Kertas, dan PulpBatang Pisang. Vol. 28. No. 4, 305-321.Shabiri, Akhmad Nadji., Ritonga., Rizky Salam., S, M. Hendra dan Ginting. (2014). Pengaruh Rasio Epoksi/ Ampas Tebu dan Perlakuan Alkali pada Ampas Tebu terhadap Kekuatan Bentur Komposit Partikel Epoksi Berpengisi Serat Ampas Tebu. Jurnal Teknik Kimia USU. Vol. 3, No. 3.Shinta N Vania, Prasetyo B. Nugroho, Ahmad M. Fuad. (2022).Pemanfaatan jerami padi (Oryza sativa) sebagai bahan pembuatan pulpdengan proses soda diawali ekstraksi pektin. Vol 28 No 2 (2022): Jurnal Teknik KimiaSucipto, Wijana dkk. (2009). Optimasi Penggunaan NaOH dan Tapioka Pada Produksi Kertas Seni Dari Pelepah Pisang. Jurnal Teknologi Pertanian Vol. 10 No. 1. 46-53.Surest, Azhary dan Satriawan Dodi. (2010).Pembuatan PulpDari Batang Rosella Dengan Proses Soda (Konsentrasi Naoh,Temperatur Pemasakan Dan Lama Pemasakan). Jurnal Teknik Kimia, No. 3, Vol. 17.Sutiyasmi, S. (2012). Daur Ulang Limbah Shaving Industri Penyamakan Kulit Untuk Kertas Seni. Majalah Kulit, Karet Dan Plastik. Vol.28 (2): 113-121.Wibisono, I., Leonardo, H., Antaresti dan Aylianawati. (2011). Pembuatan Pulpdari Alang-Alang. Widya Teknik, 10. No. 1, hal: 11-20.
Downloads
Submitted
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Agroindustrial Technology Journal
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The author whose published manuscript approved the following provisions:
1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).
2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.
